Kenwood KX-W5040 User Manual

System connections
Make
connection
as
shown
below.
When
connecting
the
related
system
components,
refer
also
to
the
instruction
manuals
of
the
related
components.
Do
not
plug
in
the
power
lead
until
all
connections
are
completed.
AC voltage selector switch
(Except for some areas)
L ©
Xs)
>
AC 110-_J LAC 220-
120v~ 240v~
oo
System contro{ cord
To AC outlet
0820 SeOmmmaC}=> O
System control connection
When
connected
to
an
amplifier
or
receiver
having
KENWOOD
SYSTEM
CONTROL
terminals,
system
operation
such
as remote
con-
trol
is
made
possible.
For
details,
refer
to
the
instruction
manual
of
the
amplifier
or
receiver.
In
addition,
when
system
control
cords
are
also
connected
to
the
CD
player
or
turntable,
other
functions
such
as
synchro
recording
(see
page
16}
and
CCRS
recording
(see
page
18)
become
possible.
lf
your
amplifier
or
receiver
is
not
equipped
with
the
SYSTEM
CONTROL
terminals,
do
not
connect
anything
to
any
SYSTEM
CONTROL
terminal.
Do not connect the unit in any system configuration other than
specified.
® Be sure to insert the system control cord plugs fully into the
SYSTEM CONTROL terminals.
@ If the system control cord and audio cords are not connected
properly,
the
automatic
system
governing
remote
control
and
sys-
tem
functions
will
not
operate.
Turntable
Notes:
1.
Connect
all
cords
firmly.
If
connections
are
loose
there
could
be
loss
of
sound
or
noise
produced.
2.
When
plugging
and
unplugging
connection
cords,
be
sure
to
first
remove
the
power
cord
from
the
AC
outlet.
Plugging/unplugging
connection
cords
without
removal
of
the
power
cord
can
cause
malfunctions
or
damage
to
the
unit.
Kx-W5040 iEn) 7
ee ae eee

Kenwood KX-W5040 Specifications

Audio Specifications

track system	4-track, 2-channel stereo
harmonic distortion	Less than 0.6%
recording system	AC bias (Frequency: 105 kHz)
wow and flutter	0.08% (W.R.M.S.)
frequency response (normal tape)	20 Hz to 15, 000 Hz, +3 dB
frequency response (CrOz tape)	20 Hz to 16, 000 Hz, +3 dB
frequency response (metal tape)	20 Hz to 16, 000 Hz, +3 dB
signal-to-noise ratio (Dolby NR ON)	65 dB (Metal tape)
signal-to-noise ratio (Dolby NR OFF)	57 dB (Metal tape)

Input/Output Specifications

input sensitivity/impedance (B DECK LINE IN)	77.5 mV/50 kΩ
output level/impedance (LINE OUT)	390 mV/3.9 kΩ

Physical Specifications

dimensions (W)	440 mm (17-5/16")
dimensions (H)	129 mm (5-1/16")
dimensions (D)	269 mm (10-9/16")
weight (net)	4.5 kg (9.9 lb)

Power

power consumption	17 W