50 KXS_KXG-TM-BA_IA-e-1932
11.2 Overview verified weighing systems
(Adjustment switch in position <Lock>, see chap. 7.9)
Available settings / explanation
P0 ChK
Weighing with
tolerance range
Upper limit value „Tolerance check weighing“, input see
chap. 10.5.1
Lower limit value „Tolerance check weighing“, input see
chap. 10.5.1
Upper limit value „Tolerance check counting“, input see
chap. 10.5.2
Lower limit value „Tolerance check counting“, input see
chap. 10.5.2
bEEP no
Acoustic signal for weighing with tolerance
range switched off
oK*
Acoustic signal when weighed load is within
tolerance limits
nG
Acoustic signal when weighed load is beyond
tolerance limits
Interface
parameter
St1*
One output for stable weighing value. Return to
zero needed between values.
St2
One output for stable weighing value. No return
to zero needed between values.
StC
Continuous data output of stable weighing
values
Pr1
An issue takes place after pressing the PRINT
key.
Pr2
Manual totalizing, see chap. 10.2
The weight value will be added into the
summation memory and issued after the M+-key
Auto
For automatic totalizing see chap. 10.3
This function is used to issue and add individual
weighing values automatically to the summation
memory on unloading of weighing scale.
CoMAnd
For remote control commands, see chap. 13.4
Available baud rate: 600, 1200, 2400, 4800, 9600*, 19200
7 bits, even parity
Continuous data transfer
Select interval 1, 2, 4, 8 16 or MAX*
Standard printer setting
Data output format, selectable 0*, 1, 2, 3
For sample logs see chap. 13.2
Standard settings English
rtCFO
Set format for date, selectable
<year_month_day> or <day_month_year>
Enter ID for RS485 interface
bLAnK
Print a blank line on output format
To Next Page
Loading...
Need help?
General
