Kobalt SM3017LW User Manual

24
AVOID DIRECT EYE CONTACT
ŏA laser is radiated when the laser guide is
turned on. Avoid direct eye contact.
ŏ Laser Warning Label:
LASER RADIATION DO NOT VIEW DIRECTLY
WITH OPTICAL INSTRUMENTS CLASS 1M
LASER PRODUCT <0.39MW, 400-700NM, CW,
Acc.IEC 60825-1.
Ɣ Laser Aperture Label. (Fig. 24)
Ɣ Laser Notice Label (Fig. 24)：
Complies with FDA performance standards
for laser products except for deviations
pursuant to Laser Notice No. 50, dated June
24, 2007.
ŏ NOTE: All the adjustments for the operation
of this machine have been completed at the
factory. Due to normal wear and use, some
occasional readjustments may be necessary.
ŏ CAUTION: Use of controls or adjustments or
performance of procedures other than those
VSHFL¿HGKHUHLQPD\UHVXOWLQKD]DUGRXV
radiation exposure.
ŏ CAUTION: The use of optical instruments
with this product will increase eye hazard.
ŏ WARNING: Do not attempt to repair or
GLVDVVHPEOHWKHODVHU,IXQTXDOL¿HGSHUVRQV
attempt to repair this laser product, serious
LQMXU\PD\UHVXOW$Q\UHSDLUUHTXLUHGRQWKLV
laser product should be performed by an
authorized service center personnel.
NOTE: If laser labels are missing, damaged
or not clear, contact with the Customer Service
Department for replacements.
LASER GUIDE ADJUSTMENT
(FIG. 25, 26, 27, 28)
NOTE: All the adjustments for the operation of
this machine have been completed at the factory.
Due to normal wear and use, some occasional
readjustments may be necessary.
To prevent serious injury, insert a padlock
(not provided) or chain with padlock through
the hole in the ON/OFF Trigger Switch prior
to making any laser adjustment. DO NOT
remove the lock from the ON/OFF Trigger
Switch during any laser adjustment.
24
Laser warning label
Laser aperture
label
WARNING
!
Laser notice
label

Kobalt SM3017LW Specifications

General

Brand	Kobalt
Model	SM3017LW
Category	Saw
Language	English