TP-6774 2/14a 65Section 7 Controller
Menu Summary List (Legend: D First level submenu, d second level submenu)
Prime
Menu
D See Section 7.13.10
Volt Select
Menu
D Volt Select: *
d 120/240 V 1 Ph
d 120/208 V 3 Ph
d 139/240 V 3 Ph
d 277/480 V 3 Ph
d 120/240 V 3 Ph
d 115/230 V 1 Ph
d 120 V 1 Ph
d 230 V 1 Ph
d 240 V 1 Ph
d 110/190 V 3 Ph
d 127/220 V 3 Ph
d 115/230 V 3 Ph
d 230/400 V 3 Ph
d 240/416 V 3 Ph
USB
Menu
D See Section 7.13.12 for
USB flowchart information
D System Frequency
D Battery DC Voltage
D CAN A (J1939,
SmartCraft, NMEA 2000) *
D Measurement System
(Metric or English) *
D Contrast (display) *
Voltage Regulator
Menu
D Voltage Regulator Voltage
Adjust *
D Volt/Hz Adjust *
D Gain Adjust *
D Stability Adjust *
D Reset Voltage Regulator
Settings *
d Reset Voltage
Regulator?
Event Log
Menu
D See Section 7.5.6 for a list
of items that can appear
in Event Log
Overview
Menu
Generator Metering
Menu
Available as scrolling or
fixed display text
D Active Shutdowns (if
present)
D Active Warnings (if
present)
D Genset State
D Average Volts
Line-to-Line
D Frequency
D Coolant Temperature
D Oil Pressure
D Battery DC Voltage
D Engine Run Time
D Next Maintenance
D Software Version
Engine Metering
Menu
D Engine Speed
(Tachometer)
D Oil Pressure
D Coolant Temperature
D Battery DC Voltage
D Volts, L1--L2 *
D Volts, L2--L3 *
D Volts, L3--L1 *
D Volts, L1-- N *
D Volts, L2-- N *
D Volts, L3-- N *
D Frequency
D Reset Calibration (User
can reset individual volt
values or reset all values)
GenSet Information
Menu
D Generator Set Model No.
D Generator Set Serial No.
D Controller Serial No.
GenSet Run Time
Menu
D Engine Run Time
D Engine Starts
D Next Maintenance
GenSet System
Menu
* User-Defined (Changeable) Menu Displays. NOTE: Some changes require activating the calibration or adjustment mode. Some displays may
only appear when in the calibration or adjustment mode. Refer to Section 7.13 Reviewing M enu Displays to activate the calibration or adjustment
mode.
To Next Page
Loading...
Need help?
General
