TP-6842 9/21 11
Introduction
This manual provides installation instructions for the DC (direct current) variable speed Model 6VSG generator set. Refer to
TP-6843, Operation Manual, for generator set operation and maintenance instructions.
This generator set is approved for use in stationary applications in locations served by a public utility, photovoltaic cells, wind
turbines, or any combination of power sources tied to a battery bank.
Have an authorized distributor/dealer install the generator set outdoors according to the instructions in this manual. The
generator set installation must comply with the National Electrical Code (NEC) and local code requirements. Do not install this
generator set indoors.
Information in this publication represents data available at the time of print. Kohler Co. reserves the right to change this
publication and the products represented without notice and without any obligation or liability whatsoever.
Read this manual and carefully follow all procedures and safety precautions to ensure proper equipment operation and to avoid
bodily injury. Read and follow the Safety Precautions and Instructions section at the beginning of this manual.
List of Related Literature
Figure 1 identifies related literature available for the generator sets covered in this manual. Only trained and qualified personnel
should install or service the generator set.
Figure 1 Related Literature
Startup and Registration
When the generator set is installed, complete the startup and installation checklists supplied with the startup notification form.
Complete and sign the startup notification form and register the unit using the Kohler online Warranty Processing System.
To Next Page
Loading...
Need help?
General
