Specifi cations
12
62 690 05 Rev. EKohlerEngines.com
TORQUE SPECIFICATIONS
3,5
ECV940 ECV980
Igniton Continued
Crankshaft Position Sensor
Earlier Design Bracket
Crankshaft Position Sensor to Bracket Screw 11.3 N·m (100 in. lb.)
Crankshaft Position Sensor Bracket to Crankcase Screw 9.7 N·m (86 in. lb.)
Crankshaft Position Sensor
Later Design Bracket
Crankshaft Position Sensor to Bracket Screw 6.8 N·m (60 in. lb.)
Crankshaft Position Sensor Bracket to Crankcase Screw 7.3 N·m (65 in. lb.)
Lifter Feed Chamber Cover
Screw 6.6 N·m (58 in. lb.)
Muffl er
Retaining Nut 24.4 N·m (216 in. lb.)
Screw, intermittent bracket (into weld nut) 13.6 N·m (120 in. lb.)
M6 Screw 9.9 N·m (88 in. lb.)
M8 Screw 24.4 N·m (216 in. lb.)
Oil Cooler
Mounting Screw 2.3 N·m (21 in. lb.)
Oil Filter Adapter/Housing
Mounting Screw 23.7 N·m (210 in. lb.)
Oil Filter Nipple 17.8 N·m (158 in. lb.)
Oil Pan
Fastener 25.6 N·m (227 in. lb.)
Oil Temperature Sensor 13.6 N·m (120 in. lb.)
Oil Temperature Sensor Reducer Bushing 17.6 N·m (156 in. lb.)
Oil Temperature Sensor Nut 2.3 N·m (20 in. lb.)
Oil Pickup Screen
Mounting Screw 11.3 N·m (100 in. lb.) into a new hole
7.7 N·m (68 in. lb.) into a used hole
Oil Pump
Mounting Screw 9.9 N·m (88 in. lb.)
Oil Sentry
TM
Pressure Switch 10.7 N·m (95 in. lb.)
Solenoid (starter)
Mounting Hardware 4.0-6.0 N·m (35-53 in. lb.)
Nut, Positive (+) Brush Lead 8.0-11.0 N·m (71-97 in. lb.)
3
Values are in Metric units. Values in parentheses are English equivalents.
5
Lubricate threads with engine oil prior to assembly.
To Next Page
Loading...
Need help?
General