Komatsu ecot3 GD655-5 User Manual

.
OPERATION
EXPLANATION OF COMPONENTS
HANDLING BATTERY DISCONNECT SWITCH
This switch cuts the flow of electricity from the battery.
This is inside the battery box on the left side of the machine.
NOTICE
When the battery disconnect switch is turned OFF, the memory and
chronometric functions in the radio are reset. In addition, communications
through KOMTRAX become unavailable.
EXPLANATION OF COMPONENTS
BATTERY DISCONNECT SWITCH
(A): OFF position
The switch key can be inserted or removed, and the flow of
electricity is cut off. Turn to this position at least 1 minute after the
engine stops.
(B): ON position
Electricity flows from the battery to the circuits.
Always set to this position before operating the machine.
HANDLING
WARNING
Do not turn the battery disconnect switch OFF when the engine is running or immediately after the engine is stopped. There is
danger that this may cause serious damage to the electrical system.
In the following cases, set the battery disconnect switch to the OFF position.
When machine is put into long-term storage (1 month or more)
When electrical system is to be repaired
When carrying out electric welding
When inspecting or handling battery
When replacing fuse or slow blow fuse
3 - 67

Komatsu ecot3 GD655-5 Specifications

General

Brand	Komatsu
Model	ecot3 GD655-5
Category	Construction Equipment
Language	English