.
MAINTENANCE
SERVICE PROCEDURE
CHECK ALTERNATOR, STARTING MOTOR
The brushes may be worn or the bearing may have run out of grease, contact your Komatsu distributor for inspection
and repairs.
If the engine is started frequently, have this inspection carried out every 1000 hours.
CHECK AND ADJUST ENGINE VALVE CLEARANCE
As special tools is required for removing and adjusting the parts, you should request service from your Komatsu
distributor.
CHECK VIBRATION DAMPER
Check that there are no cracks or peeling in the outside surface of the rubber.
If any cracks or peeling are found, contact your Komatsu distributor to have the parts replaced.
CHECK ACCUMULATOR GAS PRESSURE
Please contact your Komatsu distributor to have the gas pressure checked when making periodically replacement
of safety parts or carrying out the legally required 2000 hour or every year service.
CHANGE GREASE IN FRONT WHEEL BEARING
Please contact your Komatsu distributor for inspection and adjustment.
4 - 76
To Next Page
Loading...
Need help?
General
