Komatsu ecot3 GD655-5 User Manual

.
OPERATION
TRANSPORTATION
LIFTING MACHINE
WARNING
The person using the crane to carry out lifting operations must be a qualified crane operator.
Never carry out lifting operations if any person is on the lifted machine.
Always use a wire rope that has ample strength for the weight of the lifted machine.
Keep the machine horizontal when lifting it.
When carrying out lifting operations, prevent the machine from moving unexpectedly by doing the followings:
Set the gear shift lever to the P (PARKING) position.
Lock by using the articulation lock pin.
Never enter the area under or around the lifted machine.
There is a risk of the machine losing its balance.
Therfore when lifting the machine, set it in the posture and use the lifting equipments shown in the following procedures.
NOTICE
This method of lifting applies to the standard specification machine.
The method of lifting differs according to the attachments and options installed.
For details of the procedure for machines that are not the standard specification, please consult your Komatsu distributor.
For weight, see "SPECIFICATIONS (PAGE 5-2)".
LIFTING PROCEDURE
Lifting position
3 - 172

Komatsu ecot3 GD655-5 Specifications

General

Brand	Komatsu
Model	ecot3 GD655-5
Category	Construction Equipment
Language	English