.
OPERATION
TRANSPORTATION
PRECAUTIONS FOR LOADING
After placing the machine on the specified position of the trailer, secure it according to the following procedure.
1.
Lower the work equipment slowly.
2. Set the gear shift lever at the P (parking) position.
3.
Turn the starting switch to the OFF position, and stop the engine, then remove the key.
4.
Lock the front frame and rear frame with the articulate lock pin.
5. Lock the front axle with the leaning stopper to prevent the front tires from falling down.
6.
When transporting the machine, place wooden blocks underneath the front and rear tires to prevent the machine
from moving about.
Also, hold it down with chain or rope.
REMARK
Round lifting hooks (1), hole in the frame under the operator's platform (2), and drawbar hole (3) can be used to hold
the machine in position.
3 - 171
To Next Page
Need help?
General
