2.
Select “ON” or “OFF”, then press ENTER switch (4).
“OFF”
KTCS does not operate.
The KTCS off pilot lamp lights up.
“ON”
KTCS operates automatically.
REMARK
This setting is maintained even after turning the starting switch
to OFF position.
The default is “ON”.
ARSC SETTING
You can set ON or OFF of the ARSC system.
1.
Select “ARSC Setting”, then press ENTER switch (4).
2.
Select “ON” or “OFF”, then press ENTER switch (4).
OPERATION EXPLANATION OF COMPONENTS
3-67
To Next Page
Loading...
Need help?
General
