INTRODUCTION
MAIN USE OF MACHINE
This Komatsu machine is designed to be used mainly for the following work:
Traveling with a load
DIRECTIONS OF MACHINE
(A) Front
(B) Rear
(C) Left
(D) Right
(E) Operator's seat
In this manual, the directions of the machine (front, rear, left, right) are determined according to the view from
the operator's seat in the direction of travel (front) of the machine.
VISIBILITY FROM OPERATOR'S SEAT
This machine complies with the visibility standard (ISO 5006).
This machine maintains a proximity visibility of a height of 1.5 m at a point 1 m away from the outside surface of
the machine, and a visibility for a circumference of 12 m.
FOREWORD INTRODUCTION
1-7
To Next Page
Loading...
Need help?
General
