Komatsu HD465-8 User Manual

4.
Turn the key in starting switch (4) to OFF position (A), and
stop the engine.
5.
Remove the key from the starting switch (4).
METHOD FOR CHECKING AFTER STOPPING ENGINE
1.
Walk around the machine and check the work equipment, machine exterior, and undercarriage, also check
for any leakage of oil or coolant. If any problems are found, repair them.
2.
Fill the fuel tank.
3.
Check the engine compartment for paper and debris. Clean out any paper and debris to avoid a fire hazard.
4.
Remove any mud affixed to the undercarriage.
METHOD FOR STARTING MACHINE (TRAVEL FORWARD AND REVERSE)
AND STOPPING MACHINE
METHOD FOR MOVING MACHINE
kk
WARNING
• When moving off the machine, check that the area around the machine is safe, then sound the horn
before starting.
• Keep people away from the machine.
• Clear any obstacles from the travel path.
• There is a blind spot behind the machine, so be extremely careful when driving the machine in re-
verse.
1.
Check that there is no warning display on the machine
monitor (1).
2.
Fasten the seat belt.
OPERATION MACHINE OPERATIONS AND CONTROLS
3-175

Komatsu HD465-8 Specifications

General

Brand	Komatsu
Model	HD465-8
Category	Trucks
Language	English