Komatsu HD465-8 User Manual

METHOD FOR CHANGING OIL IN DEFERENTIAL CASE
kk
WARNING
• Immediately after the engine is stopped, its parts and oil are still very hot and may cause burn in-
jury. Wait for the temperature to go down, and then start the work.
• If there is remaining pressure inside the case, the oil or plug may jump out. Turn the plug slowly to
release the pressure, then remove it carefully.
Refill capacity: 95 ℓ
Items to be prepared
Container to catch the drained oil
1.
Remove the drain plug (P) and drain the oil.
2.
After draining the oil, tighten the drain plug.
3.
Add the specified amount of oil through the hole of plug
(G).
4.
After adding oil, check that the oil level is in the specified
range.
METHOD FOR CLEANING DIFFERENTIAL CASE BREATHER
kk
WARNING
Immediately after the engine is stopped, its parts and oil are still very hot and may cause burn injury.
Wait for the temperature to go down, and then start the work.
1.
Stop the engine.
2.
Remove mud and dirt around the breather.
3.
Remove the breather.
Cover the mounting section of the breather to prevent en-
try of dirt.
4.
Remove the nut (1) of breather assembly.
5.
Remove the cover (2).
6.
Rinse the breather (3) in clean diesel fuel or flushing oil,
and remove the dirt inside.
7.
Install the breather element (3).
8.
Install the cover (2) and nut (1).
9.
Install the breather assembly.
MAINTENANCE PROCEDURE MAINTENANCE
4-64

Komatsu HD465-8 Specifications

General

Brand	Komatsu
Model	HD465-8
Category	Trucks
Language	English