METHOD FOR STOPPING MANUAL OPERATION
Press the air conditioner OFF switch.
The display on the monitor goes out and the operation stops.
METHOD FOR OPERATING WITH COLD AIR TO FACE AND WARM AIR TO FEET
To operate with cold air blowing to the face and warm air blowing to the feet, set as follows.
1.
Press fan switch and adjust the air flow.
When doing this, check that temperature setting (A) and
air flow (B) are displayed on the monitor.
2.
Press vent selector switch and set the vent display on the
display monitor to the display shown in the figure.
HANDLE AIR CONDITIONER OPERATION
3-232
To Next Page
Loading...
Need help?
General
