WARNING
• The person using the crane to perform lifting operations must be a qualified crane operator.
• Do not lift the machine with someone in it.
• Always use a wire rope that has ample strength for the weight of the machine being lifted.
• When lifting, keep the machine horizontal.
• Before starting the lifting operation, be sure to stop the engine, and apply the parking brake.
• Never enter the area under or around a lifted machine.
• Never try to lift the machine in any other posture or by using any other lifting equipment than those
given in the following procedures.
There is a danger that the machine loses its balance.
NOTICE
This lifting method applies to the standard specification machine.
The method of lifting differs depending on the attachments and options installed.
For the procedure for the machine with other than standard specification, consult your Komatsu distrib-
utor.
For the weight of the standard specification machine, see “Weight table”.
NOTICE
• Use protectors, etc. so that the wire ropes will not be broken at sharp edges or narrow places.
• When using a spreader beam, select an ample width to prevent contact with the machine.
Consult your Komatsu distributor before performing lifting work.
TRANSPORTATION OPERATION
3-244
To Next Page
Loading...
Need help?
General
