CAUTION
The Super Long Front machine is not to be used for lifting.
CAUTION
Always use low travel speed and avoid travelling over rough ground.
CAUTION
Do not use the equipment so that the machine lifts off the ground.
CAUTION
Check the stability of the super long front machine carefully (left, right, front and rear) before starting
work operations.
CAUTION
Do not use P mode. This will cause excessive loading of the super long front equipment, leading to
wear and damage. In addition, please not that the POWER MAX switch is disabled.
CAUTION
Do not bring any shock loading on the work equipment.
CAUTION
Do no apply any side load to the bucket.
CAUTION
Attachments like breakers and fork grabs may not be used.
CAUTION
Use with engine throttle at 70-80% for ease of use and safety.
CAUTION
Do not operate the Super Long Front control levers in the same way as a standard excavator. The Super
Long Front equipment has a higher inertia and will achieve higher velocities, causing wear and damage.
WHEN TRAVELLING
• Lower the boom, pull in the arm, keep the work equipment parallel to the track and travel slowly.
• Never mount obstacles when travelling on rough ground. This may cause the machine to become unstable
and overturn.
ATTACHMENTS AND OPTIONS SUPER LONG FRONT BOOM AND ARM
6-31
To Next Page
Loading...
Need help?
General
