3-34
24. SERVICE PROCEDURE 24. SERVICE PROCEDURE
24.2.5 CHECK TRANSFER CASE OIL LEVEL, ADD OIL
WARNING
‡ When checking the oil level, apply the parking brake, and lock
the front and rear frames with the safety bar and pin.
‡ The oil is at high temperature after the machine has been
operated. Always wait for the temperature to go down before
starting this operation.
Carry out this procedure if there is any oil leak from the transfer
case.
1. Open filler plug F and check the oil level.
If the level is correct, the oil comes out from hole.
2. If the oil level is not correct, add engine oil through oil filler F.
For details of the oil to use, see “20. USE OF FUEL, COOLANT
AND LUBRICANTS ACCORDING TO AMBIENT TEMPERATURE.”
To Next Page
Loading...
Need help?
General
