3-40
24.2.12 ADJUST PARKING BRAKE RELEASE LEVER
Checking
Depress the parking brake pedal 3 – 4 notches, then pull the
release lever to return the parking brake pedal to its original position.
If the travel is not 35 – 50 mm (1.4 – 2 in) when the lever is released,
adjust as follows.
Adjusting
WARNING
Before carrying out adjustment, always block the tires and take
action to prevent the machine from slipping.
Secure the front and rear frames with the safety bar and pin.
1. Loosen locknut 1 of the cable.
2. Adjust the position of the cable so that the travel is 30 – 50 mm
(1.2 – 2 in).
3. Secure with locknut 1.
24. SERVICE PROCEDURE 24. SERVICE PROCEDURE
To Next Page
Loading...
Need help?
General
