2-47
5. Release brake pedal 2.
6. Operate work equipment control lever 6 to lower the bucket to
the ground.
7. Lock work equipment control lever 6 with safety lock 7.
12.13 CHECKS AFTER COMPLETION OF
OPERATION
Check the engine water temperature, engine oil pressure, HST oil
temperature, and fuel level with the meter and lamps.
If the engine has overheated, do not stop it suddenly. Run the
engine at a midrange speed to allow the engine to cool down before
stopping it.
12. OPERATION 12. OPERATION
To Next Page
Loading...
Need help?
General
