Making copies
5
bizhub 163/211 5-23
Loading label sheets into the bypass tray
Load label sheets into the manual bypass tray one sheet at a time.
A maximum of 20 label sheets can be loaded into the multi bypass tray.
2
Reminder
After label sheets have been loaded, specify the paper size and paper
type settings from the control panel.
% Load the label sheets in either the w or v orientation, depending on the
orientation of the document, with the side to be printed on facing down.
– For details on specifying the settings for the paper size and paper
type, refer to steps 4 through 7 of the procedures in "Copying onto
manually fed paper (manual bypass tray)" on page 5-28 and
"Copying onto manually fed paper (multi bypass tray)" on
page 5-31.
To Next Page
Loading...
Need help?
General
