Confirm the transfer-mode option in section 4 of the setup
menu is set to PictBridge. Connect the camera to a
PictBridge compatible printer using the camera’s USB cable.
The larger plug on the cable is connected to the printer.
Open the AV out/ USB port cover and insert the smaller plug
of the cable into the camera. Turn the camera on; the
PictBridge screen is displayed automatically.
Individual still images can be selected for printing on the
PictBridge screen. For other printing options, see the menu
navigation section on page 110.
108 DATA-TRANSFER MODE
PICTBRIDGE
Use the left/right keys of the controller to
display the image to be printed.
Total number of prints
Number of copies
Press the up key to select the number of
copies to be printed. To deselect an image
for printing, press the down key until the
number of copies reaches zero.
Repeat the previous steps until all the images to be printed are selected. Press
the central button of the controller to continue.
:select:move :print
To Next Page
Loading...
Need help?
General
