56 ADVANCED RECORDING
AUTO DSP
Automatic Digital Subject Program Selection can be
temporarily disabled in the auto-recording menu. When
disabled, the program exposure mode is active. If the camera
is turned off, Automatic Digital Subject Program Selection is
activated.
Drive mode
Image size
Quality
Auto DSP
Digital zoom
Single
2272x1704
Standard
On
Off
DIGITAL ZOOM
The digital zoom is activated in all recording menus (p. 44).
The digital zoom extends the power of the telephoto position of the optical zoom by up
to 4X in 0.2X increments. The transition between the optical zoom and digital zoom is
seamless. When the digital zoom is active, the image magnification is displayed on the
monitor and the focus frames change to a single focus area. Because of the degree of
magnification, the use of a tripod is recommended.
The digital zoom is operated by the zoom
lever (1). Slide the lever right (T) to zoom
in to the telephoto position of the lens.
When the digital zoom activates, the
image magnification will be displayed on
the monitor. Turn the lever left (W) to
zoom out. After zooming, the zoom scale
is displayed briefly. The yellow section
indicates the digital-zoom range.
Digital-zoom images are interpolated to
the set image size. Some loss of quality
may be evident.
Magnification
Zoom scale
To Next Page
Loading...
Need help?
General
