18 GETTING UP AND RUNNING
Use the left and right keys to select the item to
be changed.
Use the up and down keys to adjust the item.
Press the central button to set the clock and
calendar.
SETTING THE DATE AND TIME
After initially inserting a memory card and batteries,
the camera’s clock and calendar must be set. When
images are recorded, the image data is saved with
the date and time of recording.
If the clock and calendar have not been set, a
message is displayed for a few seconds each time
the camera is turned on. This message is also
displayed if the clock and calendar reset when the
camera is stored without batteries for a long period.
Date/Time setup screen
MM / DD / YYYY
00 : 00
Date/Time set
:enter
2004 . 01 . 01
Set date/time?
NoYes
Use the left and right keys of the controller (1)
to select “Yes.” “No” cancels the operation.
Press the center of the controller to open the
date/time setup screen.
The date/time setup screen can be opened in section 2 of
the setup menu.
:sel.:move
1
To Next Page
Loading...
Need help?
General
