94 SETUP MENU
VIDEO OUTPUT
Camera images can be displayed on a television (p. 84).
The video output can be changed between NTSC and PAL
in section 4 of the setup menu. North America uses the
NTSC standard and Europe uses the PAL standard. Check
which standard is used in your region to play back images
on your television set.
SHUTTER FX
When the shutter is released, a shutter sound effect
gives a positive confirmation a still image is recorded.
The sound effect can be turn off in section 3 of the
setup menu (p. 86). Two shutter effects are available.
Signal 1 is taken from the Dynax/Maxxum 9 SLR and
signal 2 is taken from the legendary Minolta CLE, a
compact rangefinder that represents the pinnacle of
the development of the Leitz-Minolta CL.
VOLUME
The volume of the audio signals and shutter FX can be increased or decreased in section
3 of the setup menu (p. 86). The volume can be turned off. This affects the camera’s
audio signals only and will not change the playback levels of a movie clip.
FOCUS SIGNAL
When the shutter-release button is pressed partway down,
an audio signal confirms the AF system has focused. The
focus signals can be changed or turned off in section 3 of
the setup menu (p. 86). Two tones are available.
Reset default
Audio signals
Volume
–
1
1
1
2
Shutter FX
Focus signal
Video output
Transfer mode
NTSC
Data storage
10 sec.
Disp. + Exp.Anti-shake
Self-timer
To Next Page
Loading...
Need help?
General
