99
When the USB connection is completed, a drive icon, or volume,
appears in My Computer or the desktop; the name varies with
memory card. When using Windows XP or Mac OS X, a window
opens requesting instructions on what to do with the image data;
follow the directions in the window.
Windows XP
Mac OS X
Windows
Mac OS
The driver needs only to be installed once. If the driver cannot be installed automatically,
it can be installed manually with the operating system’s add-new-hardware wizard; see
the instructions on the following page. During installation, if the operating system
requests the Windows 98 CD-ROM, insert it into the CD-ROM drive and follow the
accompanying instructions on the screen. No special driver software is required for other
Windows or Macintosh operating systems.
CONNECTING TO WINDOWS 98 AND 98 SE
Before connecting the camera to the computer, place
the DiMAGE Viewer CD-ROM in the CD-ROM drive.
The DiMAGE installer menu should automatically
activate. To automatically install the Windows 98 USB
driver, click on the starting-up-the-USB-device-driver-
installer button. A window appears to confirm that the
driver should be installed; click “Yes” to continue.
When the driver has been successfully installed, a
window appears. Click “OK.” Restart the computer
and connect the camera (p. 98) to complete the
operation.
Automatic Installation
To Next Page
Loading...
Need help?
General
