Konica Minolta DiMAGE Z3 User Manual

65
CUSTOM KEY FUNCTION
The function assigned to the flash mode button can be
selected among the flash mode, drive mode, white balance,
focus mode, color mode, and camera sensitivity. This can
be set in section 1 of the P, A, S, and M menus (p. 44). The
flash mode can also be changed in section 2 of the P, A, S,
and M menus.
Pressing the flash-mode button changes the function set in
the menu. Press the central button of the controller or press
the shutter-release button partway down to apply the
setting.
When selecting custom white balance, the calibration
screen appears. Fill the frame with a white object and press
the central button of the controller to calibrate the camera.
:enter
Key func.
:enter:sel.
Focus mode
Color mode
White balance
Drive mode
Flash mode
Sensitivity
Drive mode
Image size
Quality
Key func.
Single
Standard
Auto
Flash mode
White balance
2272x1704
When the key-function option is selected and
entered, a selection screen appears. Use the
four-way key of the controller to select the
function. Press the central button to complete
the operation.
:select
:enter
When selecting the continuous
advance, progressive capture, or
bracketing drive mode, or preset
white balance, a selection screen appears. Use the left/right
keys of the controller to display the appropriate mode or
bracketing increment and press the central button of the
controller to select it.

Konica Minolta DiMAGE Z3 Specifications

General

Brand	Konica Minolta
Model	DiMAGE Z3
Category	Digital Camera
Language	English