To Next Page

To Previous Page

109

The number of prints in the print run are displayed as well

as the print parameters selected with the menu. See the

menu navigation section for more information (p. 110).

Press the central button of the controller to begin printing,

or press the menu button to return to the PictBridge screen.

A maximum number of fifty images can be printed.

Once printing begins, the operation can be canceled by pressing

the center of the controller. When printing run is finished, a

message indicates the end of the operation; press the center of

the controller and turn the camera off to end the routine.

If the battery is exhausted before the print run is complete, printing is canceled. Use a

fully-charged battery or the optional AC adapter.

If a minor problem occurs during printing, such as the paper runs out, follow the

procedure recommended for the printer; no action is required for the camera. If a major

printer error occurs, press the center of the controller to end the routine. Refer to the

printer manual for the correct procedure for the printer problem. Check the printer

settings before starting again and deselect the images that were printed.

NOTES ON PRINTING ERRORS

No. of prints:

Print size:

Data print:

Printer setup

Print quality:

Layout:

:start

Printing finished.

Konica Minolta DiMAGE Z3 User Manual

Other manuals for Konica Minolta DiMAGE Z3