80 ADVANCED PLAYBACK
Section 2 of the playback menu controls the slide-show function. This function
automatically displays all still images and movie clips on the memory card in order. The
menu has the following options:
SLIDE SHOW
Slide show
Playback
Duration
Repeat
Enter
All
frames
Marked
Frames
1 - 60s.
Yes / No
To start the slide-show presentation. Highlight “Enter” and
press the central button of the controller to start the slide show.
To select all the images on the memory card to be displayed
in the slide-show presentation.
To select specific images to be displayed in the slide-show
presentation. When this setting is chosen, the frame-selection
screen is displayed. Use the left/right keys of the controller to
highlight the image to be included in the presentation.
Pressing the up key will mark the image with a check indicator.
To deselect a marked image, highlight it with the yellow border
and press the down key; the check disappears. Continue until
all the images have been edited. Press the controller to set the
marked frames, or press the menu button to cancel the
operation and return to the playback menu.
To select the period each still image is displayed during the
slide show.
Selecting “Yes” causes the slide show to repeat until it is
canceled using the menu button. “No” ends the slide show
presentation and returns to the playback menu when all the
images have been displayed once.
To Next Page
Loading...
Need help?
General
