KSB BoosterControl Advanced User Manual

5 Installation at Site
14 of 88
BoosterControl Advanced
5 Installation at Site
5.1 Safety regulations
DANGER
Incorrect installation
Danger to life!
▷ Install BoosterControl Advanced in a flood-proof location.
▷ Never use BoosterControl Advanced in potentially explosive atmospheres.
5.2 Checking ambient conditions
1. Check and safeguard ambient conditions. (ðSection8.1,Page34)
2. Contact the manufacturer if the device is to be used under ambient conditions
other than indicated.
3. Verify that the place of installation meets the following requirements:
- Sufficient space for installation/removal and proper ventilation
- No direct sunlight
- Protected against freezing
- Flood-proof
5.3 Installing BoosterControl Advanced
Install BoosterControl Advanced while referring to the outline drawing.
5.4 Electrical connection
DANGER
Incorrect electrical installation
Danger of death from electric shock!
▷ Any work on the electrical system shall be undertaken by a trained electrician
only (DINVDE 0105 - Part1/07.83).
▷ Before commencing any work on the electrical installations, de-energise the
system and make sure it cannot be re-started unintentionally. Ensure staff
safety by PELV
1)
:
▷ Only motor protection devices with safe isolation to EN50178 (VDE0160) may
be connected directly.
CAUTION
Improper electrical connection
Damage to property
▷ All connections shall be made in accordance with the technical specifications
issued by the local energy supply companies.
▷ Check the type of current and voltage of the mains.
5.4.1 Electrical connections
All electrical connections of BoosterControl Advanced to the power relays or
contactors must always have circuit protection.
If more than two apparatuses are controlled in a control cabinet, always provide for
a separate control voltage supply in the control cabinet (as per EN60204).
1) PELV = Protective Extra Low Voltage. The inputs for the thermal circuit breakers (TCBs) are not galvanically isolated from
the PELV circuits of the control inputs, 24Vdigital outputs and service interface.

KSB BoosterControl Advanced Specifications

General

Brand	KSB
Model	BoosterControl Advanced
Category	Controller
Language	English