6 Operation
31 of 88
BoosterControl Advanced
Displaying information on the start screen
Parameters indicating a system status can be displayed continuously on the start
screen.
1. Select parameter 3-10-1 (root menu).
2. Select the parameter to be displayed on the start screen.
6.5 General information on parameterisation
CAUTION
Incorrect parameter settings
Damage to property!
▷ Before changing a parameter, ensure that the new parameter is within the
system's operating limits.
Restart/reset
BoosterControl Advanced reboots automatically (RESET) after the following
parameters have been changed:
▪ 3-3-1
▪ 3-3-2
▪ 3-3-3
▪ 3-3-6
▪ 3-3-7
▪ 3-12-1
When a parameter is being set, a bar illustrates the parameter's value range, so the
user can see how far the current value can be changed.
6.6 User login
The user must log in to the device before settings can be made.
1. Select parameter 3-2-1-1.
2. Enter access level and associated password:
- Customer: 7353
Users logged in to BoosterControl Advanced are automatically logged off after 15
minutes of inactivity.
To Next Page
Loading...
Need help?
General
