15 ELECTRICAL SYSTEM 101
15.5 Removing the headlight mask with the headlight
602762-10
– Switch off all power consumers.
– Remove screw 1 and take off the clamp.
– Release rubber band 2. Slide the headlight mask up and swing it forward.
602763-11
– Disconnect the electrical plug-in connection 3 and take off the headlight mask
with the headlight.
15.6 Refitting the headlight mask with the headlight
602763-10
Main work
– Connect the electric plug connector 1.
602762-11
– Position the headlight mask and fix it with the rubber band 2.
Info
Ensure that the holding lugs engage in the fender.
– Position the brake line and wiring harness. Put on the clamp and mount and
tighten screw 3.
Finishing work
– Check the headlight setting. ( p. 103)
15.7 Changing the headlight bulb
Note
Damage to reflector Reduced brightness.
– Grease on the lamp will evaporate due to the heat and be deposited on the reflector. Clean the lamp and keep it free of grease
before mounting.
Preparatory work
– Remove the headlight mask with the headlight. ( p. 101)
To Next Page
Loading...
Need help?
General
