12 SERVICE WORK ON THE CHASSIS 79
12.41 Checking the swingarm x
401341-01
– Check the swingarm for damage, cracking, and deformation.
» If the swingarm shows signs of damage, cracking, or deformation:
–
Change the swingarm. x
Info
A damaged swingarm must always be changed. Repair of the
swingarm is not authorized by KTM.
12.42 Checking the routing of the throttle cable
Preparatory work
– Remove the seat. ( p. 69)
–
Remove the fuel tank. x ( p. 73)
C00501-10
Main work
(All 125/200 models)
– Check the routing of the throttle cable.
The throttle cable must be routed behind the handlebar, on the right of the
upper frame tube, and to the carburetor.
» If the throttle cable is not routed as specified:
– Correct the routing of the throttle cable.
C00502-10
(All 250/300 models)
– Check the routing of the throttle cable.
The throttle cable must be routed behind the handlebar, on the right of the
upper frame tube, and to the carburetor.
» If the throttle cable is not routed as specified:
– Correct the routing of the throttle cable.
Finishing work
–
Install the fuel tank. x ( p. 74)
– Mount the seat. ( p. 69)