7 SPEEDOMETER 32
7.2.13 Display mode SPEED/LAP (lap time)
400320-01
– Repeatedly press the button briefly until LAP appears at the bottom right of the
display.
In the LAP display mode, up to 10 lap times can be timed with the stop watch.
Info
If the lap time continues running after the button is pressed, 9 memory loca-
tions are occupied.
Lap 10 must be timed using the button .
Press the button
for 2–3 seconds.
The stop watch and the lap time are reset.
Briefly press the
button .
Next display mode
Press the button
for 2–3 seconds.
Stops the clock.
Briefly press the
button .
Starts the stop watch or stop the current lap time measure-
ment, stores it and the stop watch starts the next lap.
7.2.14 Viewing the lap time
400321-01
Condition
• The motorcycle is stationary.
– Repeatedly press the button briefly until LAP appears at the bottom right of the
display.
– Briefly press the button .
Press the button
for 2–3 seconds.
The stop watch and the lap time are reset.
Briefly press the
button .
Select a lap from 1–10
Press the button
for 2–3 seconds.
No function
Briefly press the
button .
View the next lap time.
7.2.15 Display mode SPEED/ODO (odometer)
400317-01
– Repeatedly press the button briefly until ODO appears at the bottom right of the
display.
The total traveled distance is shown in display mode ODO.
Press the button
for 2–3 seconds.
No function
Briefly press the
button .
Next display mode
Press the button
for 2–3 seconds.
No function
Briefly press the
button .
No function
7.2.16 Display mode SPEED/TR1 (trip master 1)
400323-01
– Repeatedly press the button briefly until TR1 appears at the top right of the dis-
play.
TR1 (trip master 1) runs constantly and counts up to 999.9.
You can use it to measure trips or the distance between refueling stops.
TR1 is coupled with A1 (average speed 1) and S1 (stop watch 1).
Info
If 999.9 is exceeded, the values of TR1, A1 and S1 are automatically reset to
0.0.
To Next Page
Need help?
General
