7 SPEEDOMETER 35
7.2.23 Table of functions
Display Press the but-
ton for 2–3
seconds.
Briefly press the
button .
Press the but-
ton for 2–3
seconds.
Briefly press the
button .
Wait 3–5 sec-
onds
Wait 10–12 sec-
onds
Display mode
SPEED/H (service
hours)
The display
changes to the
Setup menu of
the speedome-
ter functions.
Next display
mode
No function No function
Setup menu No function Activates the
flashing display
and changes to
the next display
No function Deactivates the
flashing display
and changes to
the next display
Changes to the
next display
without changes
Setup menu
starts, stores
the settings,
and changes to
H or ODO.
Setting the unit of
measurement
No function Starts selection,
activates Km/h
display
No function Activates Mph
display
Changes to the
next display,
changes from
selection to the
Setup menu
Saves and
closes the Setup
menu
Display mode
SPEED/CLK (time)
The display
changes to the
Setup menu of
the clock.
Next display
mode
No function No function
Setting the clock Increases the
value
Increases the
value
Reduces the
value
Reduces the
value
Changes to the
next value
Closes the
SETUP menu
Display mode
SPEED/LAP (lap
time)
The stop watch
and the lap time
are reset.
Next display
mode
Stops the clock. Starts the stop
watch or stop
the current lap
time measure-
ment, stores it
and the stop
watch starts the
next lap.
Viewing the lap
time
The stop watch
and the lap time
are reset.
Select a lap
from 1–10
No function View the next
lap time.
Display mode
SPEED/ODO
(odometer)
No function Next display
mode
No function No function
Display mode
SPEED/TR1 (trip
master 1)
Displays of TR1,
A1 and S1 are
reset to 0,0.
Next display
mode
No function No function
Display mode
SPEED/TR2 (trip
master 2)
Clears the val-
ues TR2 and A2.
Next display
mode
Reduces value
of TR2.
Reduces value
of TR2.
Setting TR2 (trip
master 2)
Increases value
of TR2.
Increases value
of TR2.
Reduces value
of TR2.
Reduces value
of TR2.
Saves and
closes the Setup
menu
Display mode
SPEED/A1 (average
speed 1)
Displays of TR1,
A1 and S1 are
reset to 0,0.
Next display
mode
No function No function
Display mode
SPEED/A2 (average
speed 2)
No function Next display
mode
No function No function
Display mode
SPEED/S1 (stop
watch 1)
Displays of TR1,
A1 and S1 are
reset to 0,0.
Next display
mode
No function No function
Display mode
SPEED/S2 (stop
watch 2)
The displays of
S2 and A2 are
set to 0,0.
Next display
mode
No function Starts or stops
S2.