22 TECHNICAL DATA 133
Screw, bottom shock absorber M12 80 Nm (59 lbf ft) Loctite
®
2701™
Screw, top shock absorber M12 80 Nm (59 lbf ft) Loctite
®
2701™
Nut, seat fixing M12x1 20 Nm (14.8 lbf ft) –
Nut, swingarm pivot M16x1.5 100 Nm (73.8 lbf ft) –
Nut, rear wheel spindle M20x1.5 80 Nm (59 lbf ft) –
Screw, top steering head M20x1.5 12 Nm (8.9 lbf ft) –
Screw-in nozzles, cooling system M20x1.5 12 Nm (8.9 lbf ft)
Loctite
®
243™
Screw, front wheel spindle M24x1.5 45 Nm (33.2 lbf ft) –
22.10 Carburetor
22.10.1 All 125 models
Carburetor type KEIHIN PWK 36S AG
Carburetor identification number FK125
Needle position 4th position from top
Jet needle N84I (NOZE / NOZF / NOZG)
Main jet 100 (168/170/172)
Idling jet 38x38 (45)
Starting jet 50 (85)
Idle air adjusting screw
Open 2.75 turns
Throttle slide 7 with cut-out
Slide stop -
22.10.2 200 EXC EU
Carburetor type KEIHIN PWK 36S AG
Carburetor identification number FK027
Needle position 3rd position from top
Jet needle NPRH (N1EH / N1EI / N1EJ)
Main jet 100 (158 / 160)
Idling jet 35x35 (40)
Starting jet 50 (85)
Idle air adjusting screw
Open 1.5 turns
Throttle slide 7 with cut-out
Slide stop Present
22.10.3 200 EXC AUS
Carburetor type KEIHIN PWK 36S AG
Carburetor identification number FK012
Needle position 3rd position from top
Jet needle R1475J (N1EH / N1EI / N1EJ)
Main jet 162 (158 / 160)
Idling jet 35 (40)
Starting jet 85
Idle air adjusting screw
Open 1.0 turn
Throttle slide 7 with cut-out
Slide stop Present
22.10.4 200 XC‑W USA
Carburetor type KEIHIN PWK 36S AG
To Next Page
Loading...
Need help?
General
