KTM 125 EXC EU User Manual

12 SERVICE WORK ON THE CHASSIS 61
101327-10
Main work
– Remove screws 1 on the left fork leg. Lift off the fork protector.
– Remove the screws on the right fork leg. Lift off the fork protector.
12.10 Installing the fork protector x
101327-10
Main work
– Position the fork protection on the left fork leg. Mount and tighten screws 1.
Guideline
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)
– Position the fork protection on the right fork leg. Mount and tighten the screws.
Guideline
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)
Finishing work
–
Install the fork legs. x ( p. 59)
–
Install the front wheel. x ( p. 93)
– Refit the headlight mask with the headlight. ( p. 101)
– Check the headlight setting. ( p. 103)
12.11 Removing the lower triple clamp x (EXC, XC‑W)
Preparatory work
– Raise the motorcycle with the lift stand. ( p. 57)
–
Remove the front wheel. x ( p. 93)
– Remove the headlight mask with the headlight. ( p. 101)
–
Remove the fork legs. x ( p. 59)
– Remove the front fender. ( p. 67)
– Remove the handlebar cushion.
602725-10
Main work
– Remove screw 1. Loosen screw 2. Take off the upper triple clamp with the han-
dlebar and set it aside.
Info
Protect the motorcycle and its attachments against damage by covering
them.
Do not bend the cables and lines.
B00806-10
– Remove O-ring 3. Remove protective ring 4.
– Take out the lower triple clamp with the steering stem.
– Take out the upper steering head bearing.

KTM 125 EXC EU Specifications

General

Brand	KTM
Model	125 EXC EU
Category	Motorcycle
Language	English