15 ELECTRICAL SYSTEM 104
101407-10
– Position protection cap 2 and turn all the way clockwise using a coin.
– Press any button on the speedometer.
The speedometer is activated.
– Position the speedometer in the holder.
– Mount and tighten the screws with washers.
602746-10
(SIX DAYS)
– Remove screws 1.
– Pull the speedometer upward out of the holder.
602748-10
– Using a coin, turn protection cap 2 all the way counterclockwise and remove
it.
– Remove speedometer battery 3.
– Insert the new battery with the label facing upward.
Speedometer battery (CR 2430) ( p. 128)
– Check the O-ring of the protection cap for correct seating.
602747-10
– Position protection cap 2 and turn all the way clockwise using a coin.
– Press any button on the speedometer.
The speedometer is activated.
– Position the speedometer in the holder.
– Mount and tighten the screws with washers.
Finishing work
– Refit the headlight mask with the headlight. ( p. 101)
– Check the headlight setting. ( p. 103)
– Set kilometers or miles. ( p. 20)
– Adjust the speedometer functions. ( p. 21)
– Set the clock. ( p. 21)
To Next Page
Loading...
Need help?
General
