14 BRAKE SYSTEM 173
trol of the brake force distribution between the two wheels, the braking force is optimally
distributed and the motorcycle is additionally stabilized.
Info
The MSC is only active in Road ABS mode.
14.2 Checking the brake discs
Warning
Danger of accidents Worn-out brake discs reduce the braking effect.
– Make sure that worn-out brake discs are replaced immediately. (Your authorized KTM workshop will be glad to help.)
400618-10
– Check the thickness of the front and rear brake discs at multiple points on each brake
disc to ensure it is at least thickness
A
.
Info
Wear will reduce the thickness of the brake disc at the contact surface
1
of
the brake linings.
Brake discs - wear limit
Front 4 mm (0.16 in)
Rear 4.5 mm (0.177 in)
» If the brake disc thickness is less than the specified value.
– Change the front brake discs.
– Change the rear brake discs.
– Check the front and rear brake discs for damage, cracking, and deformation.
» If the brake disc exhibits damage, cracking, or deformation:
– Change the front brake discs.
To Next Page
Loading...
Need help?
General
