14 BRAKE SYSTEM 180
– Check the rear brake linings. ( p. 180)
K00853-10
Main work
–
Remove screw cap
1
with membrane
2
.
–
Add brake fluid up to MAX marking
A
.
Brake fluid DOT 4 / DOT 5.1 ( p. 255)
–
Mount and tighten screw cap
1
with membrane
2
.
Info
Clean up overflowed or spilled brake fluid immediately with water.
14.8 Checking the rear brake linings
Warning
Danger of accidents Worn-out brake linings reduce the braking effect.
– Ensure that worn-out brake linings are replaced immediately. (Your authorized KTM workshop will be glad to help.)
Warning
Danger of accidents Damaged brake discs reduce the braking effect.
If the brake linings are not changed in time, the brake lining carriers grind against the brake disc. As a consequence, the braking
effect is greatly reduced and the brake discs are destroyed.
– Check the brake linings regularly.
To Next Page
Loading...
Need help?
General
