KTM 200 User Manual

– Open the lock washer of the inner clutch hub.
– Mount the clutch holder on the inner clutch hub and undo the
hexagon nut.
– Remove the clutch holder.
–Take the hexagon nut, the detent edged ring and the inner clutch
hub off the main shaft.
–Take the supporting disc
1 and the outer clutch hub together with
the bearing off the main shaft.
– Remove the intermediate starter gear and the stop disc
2 below.
– Mount the primary gear holder and undo the hexagon nut (LH
thread).
– Remove the primary gear holder.
–Take the hexagon nut, the detent edged ring and the primary gear off
the crankshaft.
–Take the woodruff key out of the crankshaft.
Shift drum locating, kickstarter
– Simply pull the shift shaft out of the housing. Keep in mind the stop
disc
3 (It can be left in the housing).
4-7C
1
2
3

KTM 200 Specifications

General

Brand	KTM
Model	200
Category	Engine
Language	English