17 TUNING THE ENGINE
138
17.6 Ignition curve plug-in connector
E00910-10
Plug-in connector
1
of the ignition timing map adjustment is
located on the frame under the fuel tank.
Info
The ignition timing map connector has no function in the
homologated (restricted) condition of the motorcycle.
Possible states
• Soft – The plug-in connector of the ignition timing map
adjustment is disconnected to achieve better rideability.
• Performance – The plug-in connector of the ignition timing
map adjustment is joined to achieve higher performance.
17.7 Changing the ignition timing map
Info
The ignition timing map connector has no function in the homologated (restricted) condition of the motor-
cycle.
Preparatory work
– Remove the seat. ( p. 80)
– Remove the fuel tank. ( p. 85)
E00910-10
Switching the ignition timing map from Performance to Soft
–
Disconnect plug-in connector
1
of the ignition timing
map adjustment.
Soft – better rideability
Switching the ignition timing map from Soft to Performance
–
Join plug-in connector
1
of the ignition timing map
adjustment.
Performance – better performance
To Next Page
Loading...
Need help?
General
