KTM 300 EXC TPI 2019 User Manual

6 CONTROLS
18
6.5 Kill switch (All XC‑W models)
E00821-10
The kill switch
1
is fitted on the left side of the handlebar.
Possible states
• Kill switch in basic position – In this position, the ignition
circuit is closed and the engine can be started.
• Kill switch pressed – In this position, the ignition circuit
is interrupted, a running engine stops, and a non-running
engine will not start.
6.6 Horn button (All EXC models)
E00820-11
The horn button
1
is fitted on the left side of the handlebar.
Possible states
• Horn button in neutral position
• Horn button pressed – The horn is operated in this position.
6.7 Light switch (All EXC models)
E00822-10
Light switch
1
is fitted on the left side of the handlebar.
Possible states
Low beam on – Light switch is in the central posi-
tion. In this position, the low beam and tail light are
switched on.
High beam on – Light switch is turned to the left.
In this position, the high beam and the tail light are
switched on.
6.8 Light switch (All XC‑W models)
E00858-10
The light switch
1
is located to the left of the combination
instrument.
Possible states
• Light off – Light switch is pressed in up to the stop. In this
position, the light is switched off.
• Light on – Light switch is pulled out to the stop. In this posi-
tion, the low beam and tail light are switched on.

KTM 300 EXC TPI 2019 Specifications

General

Brand	KTM
Model	300 EXC TPI 2019
Category	Motorcycle
Language	English