KTM 300 EXC TPI 2019 User Manual

15 ELECTRICAL SYSTEM
120
The charging time may be longer at low temperatures.
This battery charger is not suitable for the trickle
charging of lithium-ion batteries.
Info
If the charging current, charging voltage, or
charging time are exceeded, the battery will be
destroyed.
If the battery is left in a discharged state for an
extended period, it will become over-discharged
and sulfated, destroying the battery.
The battery is maintenance-free.
Never remove cover
1
.
– Switch off the battery charger after charging and disconnect
from the battery.
Finishing work
– Install the battery. ( p. 118)
– Mount the seat. ( p. 80)
15.4 Changing the main fuse
Warning
Fire hazard Incorrect fuses overload the electrical system.
– Only use fuses with the required ampere value.
– Do not bypass or repair fuses.
Info
The main fuse protects all power consumers of the vehicle.
Preparatory work
(All EXC models)
– Press and hold the kill switch while the engine is idling
until the engine stops.
(All XC‑W models)
– Press and hold the kill switch while the engine is idling
until the engine stops.
– Remove the seat. ( p. 80)
E00874-10
Main work
–
Pull the EFI control unit
1
upward off the rubber plugs
2
and hang to the side.

KTM 300 EXC TPI 2019 Specifications

General

Brand	KTM
Model	300 EXC TPI 2019
Category	Motorcycle
Language	English