KTM 300 EXC TPI 2019 User Manual

SERVICE SCHEDULE 10
53
Every 40 operating hours when used for motorsports
Every 10 operating hours when used for motorsports
Annually
Every 80 operating hours
Every 40 operating hours
Once after 20 operating hours
Once after 10 operating hours
Perform major engine service including removing and installing engine.
(Change the connecting rod, conrod bearing, and crank pin. Clean the pressure
sensor cylinder connection. Check the transmission and shift mechanism.
Change all engine bearings.)
● ●
○ One-time interval
● Periodic interval

KTM 300 EXC TPI 2019 Specifications

General

Displacement	293.2 cm³
Bore x Stroke	72 mm x 72 mm
Starter	Electric starter
Transmission	6-speed
Cooling	Liquid cooled
Rear Suspension	WP XPLOR PDS shock absorber
Seat Height	960 mm
Ground Clearance	370 mm
Fuel Tank Capacity	9.5 liters
Engine Type	2-stroke
Fuel System	Transfer Port Injection (TPI)
Frame	Central double-cradle type 25CrMo4 steel
Front Suspension	WP Xplor 48
Front Brake	Disc brake
Rear Brake	Disc brake 220 mm