KTM 350 SX-F User Manual

SERVICE WORK ON THE ENGINE 17
119
17.4 Adding engine oil
Info
Too little engine oil or poor-quality engine oil will result in premature wear of the engine.
0
0
401955-10
–
Remove oil filler plug
1
with the O-ring from the clutch
cover.
– Add the same engine oil used when the last oil change was
carried out.
Engine oil (SAE 10W/50) ( p. 138)
Info
For optimal performance of the engine oil, do not mix
different types of engine oil.
We recommended changing the engine oil when neces-
sary.
– Mount and tighten the filler plug together with the O-ring.
Danger
Danger of poisoning Exhaust gases are toxic and inhal-
ing them may result in unconsciousness and death.
– Always make sure there is sufficient ventilation
when running the engine.
– Use an effective exhaust extraction system when
starting or running the engine in an enclosed
space.
– Start the engine and check for tightness.

KTM 350 SX-F Specifications

General

Displacement	349.7 cc
Bore x Stroke	88 mm x 57.5 mm
Starter	Electric starter
Transmission	5-speed
Cooling	Liquid cooled
Frame	Central Double-Cradle Type 25CrMo4 Steel
Front Suspension	WP XACT-USD, Ø 48 mm
Rear Suspension	WP XACT Monoshock with linkage
Front Brake	Disc brake
Rear Brake	Disc brake
Ground Clearance	370 mm
Seat Height	950 mm
Ignition	Keihin EMS
Final Drive	Chain
Engine Type	Single-cylinder, 4-stroke
Fuel Tank Capacity	7.2 L