STORAGE 19
133
Info
Do not use non-porous materials since they prevent
humidity from escaping, thus causing corrosion.
Avoid running the engine for a short time only. Since
the engine cannot warm up properly, the water vapor
produced during combustion condenses and causes
valves and the exhaust system to rust.
19.2 Preparing for use after storage
401059-01
– Install the 12 V battery. ( p. 109)
– Remove the motorcycle from the lift stand. ( p. 53)
– Perform checks and maintenance measures when preparing for
use. ( p. 29)
– Make a test ride.
To Next Page
Loading...
Need help?
General
