MAINTENANCE ON CHASSIS AND ENGINE 127
– Switch off all power-consuming components and switch off the engine.
– Remove the rear fender. ( p. 140)
200150-10
– Disconnect the negative (minus) cable of the battery.
– Pull back the plus pole cover and disconnect the positive (plus) cable of the battery.
– Loosen the rubber band .
– Remove the battery.
9.55Installing the battery
200150-11
– Check parts for damage and wear. Replace damaged or worn parts.
– Place the battery in the battery holder.
4Ah battery (YTX5L-BS) ( p. 189)
– Reconnect the rubber band .
– Attach the plus cable and replace the plus pole cover .
– Connect the negative (minus) cable of the battery.
– Install the rear fender. ( p. 142)
To Next Page
Loading...
Need help?
General
