SERVICE SCHEDULE 61
8SERVICE SCHEDULE
8.1
Important maintenance work to be carried out by an authorized KTM workshop.
S3N S15A S30A
Engine
Change the engine oil and oil filter, clean the oil screens. x ( p. 163)
• • •
Replace spark plug. •
Check and adjust valve clearance. • • •
Check engine mounting screws for tightness. • • •
Clean spark plug connectors and check for tightness. • • •
Check shift lever screw for tightness. • • •
Carburetor Check carburetor connection boots for cracks and leakage. • •
Check vent hoses for damage and routing without sharp bends. • • •
Check idle. • • •
Attachments Check the cooling system for leakage. • • •
Check the antifreeze and coolant level. ( p. 151) • • •
Check the exhaust system for leakage and looseness. • •
Check Bowden cables for damage, smooth operation and routing without sharp bends. • • •
Check the fluid level of the hydraulic clutch. ( p. 149) • • •
Clean the air filter. x ( p. 147)
• • •
Check cables for damage and routing without sharp bends. • •
Check that the electrical equipment is functioning properly. • • •
Check the headlamp setting. • •
Check speed limitation in reverse gear. • • •
Brakes Check the front brake linings. ( p. 108) • • •
Check the rear brake linings. ( p. 118) • • •
Check the brake discs. ( p. 103) • • •
To Next Page
Loading...
Need help?
General
