RIDING INSTRUCTIONS 45
7RIDING INSTRUCTIONS
7.1
Checks before putting into operation
Info
Make sure that the vehicle is in a perfect technical condition before use.
Info
In the interests of riding safety, make a habit of making a general check before you ride.
– Check the engine oil level. ( p. 162)
– Check the engine for oil loss.
– Check the fuel supply.
– Check the chain tension. ( p. 98)
– Check the chain dirt accumulation. ( p. 97)
– Check the tire condition. ( p. 125)
– Checking the tire air pressure. ( p. 126)
– Check the front brake fluid level. ( p. 106)
– Check the rear brake fluid level. ( p. 115)
– Check the front brake linings. ( p. 108)
– Check the rear brake linings. ( p. 118)
– Check brake system function.
– Check that the rear hubs are tight.
– Check that the footrests are tight.
– Check the handlebar bridge bearing for excessive play.
– Check the handlebar for smooth operation and play.
– Check the coolant level. ( p. 152)
– Check the cooling system for leakage.
To Next Page
Loading...
Need help?
General
